---

Here we have one of our Upcoming WAP-U in-wall Access Points from Clear Flow.

In the image, you will also notice a 25mm electrical pattress box.

---

This quick blog will show you the ease of installation of our WAP-U unit into a standard UK single pattress.

---

Firstly, remove the front plate from the WAP-U

-

Connect the Ethernet cable from inside the wall to the back of the Access Point.

Now place the faceless unit on top of your pattress, in-line with the screw holes.

Using the supplied screws, fix the unit to the pattress box.

-

Replace the faceplate on the front of the unit to finish the installation.

-

Congratulations, it's as easy as that!